Engineering Drawing Helix Upon Cone Online Exam Quiz
Engineering Drawing Helix Upon Cone GK Quiz. Question and Answers related to Engineering Drawing Helix Upon Cone. MCQ (Multiple Choice Questions with answers about Engineering Drawing Helix Upon Cone
Mean diameter of conical spring is 100 mm, height of spring is 50 mm, angle between the base and slanting side of the cone is 45 degrees and diameter of the wire is 5 mm. What is the inner diameter at top edge of spring?
Options
A : 10
B : 5
C : 20
D : 15
In a regular cone, the angle between base and slanting surface is 60 degrees and the base diameter is 75 mm. If a helix is to be build on such a cone up to half of cones height with 6 revolutions in it. Pitch of the helix is?
Options
A : 10.8
B : 5.4
C : 6.4
D : 12.9
Pitch of helix is 7 mm and the number of revolutions is 15. Length of spring is?
Options
A : 100 mm
B : 10.5 cm
C : 110 mm
D : 12 cm
Base diameter of a conical helix is 60 mm, height of spring is 30 mm, angle between the base and slanting side of cone is 45 degrees and diameter of wire is 3 mm. What is the outer diameter at the top edge of spring?
Options
A : 14
B : 15
C : 30
D : 18
Base diameter of conical helix is 80 mm, height of spring is 30 mm, angle between the base and slanting side of cone is 45 degrees and diameter of wire is 4 mm. What is the outer diameter at a top edge of spring?
Options
A : 14
B : 24
C : 32
D : 18
In a regular cone, the angle between base and slanting surface is 45 degrees and the base diameter is 100 mm. If a helix is to be built on such a cone with a pitch of 5. How many revolutions do the helix made in this cone?
Options
A : 14.1
B : 18
C : 10
D : 20
A conical spring is to be designed with base diameter 100 mm and another end diameter 50 mm and pitch of spring is 5 mm to a height of 80 mm. How many revolutions are there in spring?
Options
A : 15
B : 16
C : 17
D : 18
The base diameter of a conical helix is 100 mm. The angle between the base and slanting side is 45 degrees. Pitch of helix is 5 mm. What is the height of helix and number of revolutions?
Options
A : 50 mm, 10
B : 25 mm, 5
C : 30 mm, 7
D : 100 mm, 15
The base diameter of a conical helix is 120 mm and other end diameter is 70 mm. The height of helix is 40 mm. What is the angle between the base and slanting side is?
Options
A : 58 degrees
B : 60 degrees
C : 30 degrees
D : 45 degrees
The base diameter of a conical helix is 100 mm and other end diameter is 80 mm. The height of helix is 50 mm. What is the angle between the base and slanting side is?
Options
A : 58 degrees
B : 79 degrees
C : 89 degrees
D : 45 degrees
Chemical Engineering Basics - Part 1 more Online Exam Quiz
Engineering Drawing Drawing Tools Uses 1
Engineering Drawing Entrance Exams
Engineering Drawing Experienced
Engineering Drawing First Angle Projection Method
Engineering Drawing Intersection Surfaces
Engineering Drawing Interview Experienced