Design Steel Structures Freshers Online Exam Quiz
Design Steel Structures Freshers GK Quiz. Question and Answers related to Design Steel Structures Freshers. MCQ (Multiple Choice Questions with answers about Design Steel Structures Freshers
Proof stress for minimum bolt tension is :
Options
A : 0.7fub
B : 0.5fub
C : 0.7fyb
D : 0.5fyb
Tensile strength of bolt is given by
Options
A : 0.9fubAn/1.1
B : 0.9fybAn/1.1
C : 0.9fubAn/1.25
D : 0.9fybAn/1.25
Minimum edge distance and end distance for rolled, machine flame cut is
Options
A : 1.7 x hole diameter
B : 1.2 x hole diameter
C : 1.5 x hole diameter
D : 2.0 x hole diameter
Maximum gauge length is _________
Options
A : 100+4t, where t is thickness of thinner plate
B : 100-4t, where t is thickness of thinner plate
C : 4t, where t is thickness of thinner plate
D : 100mm
Maximum edge distance should not exceed ______
Options
A : 10t?, where ? = ?(250/fy), t = thickness of thinner outer plate
B : 20t?, where ? = ?(250/fy), t = thickness of thinner outer plate
C : 16t?, where ? = ?(250/fy), t = thickness of thinner outer plate
D : 12t?, where ? = ?(250/fy), t = thickness of thinner outer plate
Spacing of tacking fasteners when exposed to weather should not exceed ______
Options
A : 32t, where t= thickness of outside plate
B : 25t, where t= thickness of outside plate
C : 20t, where t= thickness of outside plate
D : 16t, where t= thickness of outside plate
In case of compression members where forces are transferred through butting faces, pitch shall not exceed ___ for a distance of 1.5 times width of member from butting faces.
Options
A : 4.5d, where d= diameter of fasteners
B : 5d, where d= diameter of fasteners
C : 2.5d, where d= diameter of fasteners
D : 5.5d, where d= diameter of fasteners
Shear strength of bolt is given by ____
Options
A : fu(nnAnb+ nsAsb)/(?3 x 1.1)
B : fy(nnAnb+ nsAsb)/(?3 x 1.1)
C : fu(nnAnb+ nsAsb)/(?3 x 1.25)
D : fy(nnAnb+ nsAsb)/(?3 x 1.25)
Tacking fasteners are used when _______
Options
A : minimum distance between centre of two adjacent fasteners is exceeded
B : maximum distance between centre of two adjacent fasteners is exceeded
C : maximum distance between centre of two adjacent fasteners is not exceeded
D : for aesthetic appearance
Chemical Engineering Basics - Part 1 more Online Exam Quiz
Design Steel Structures Design Welds
Design Steel Structures Determination Earthquake Loads
Design Steel Structures Entrance Exams
Design Steel Structures Experienced
Design Steel Structures Factors Affecting Lateral Stability
Design Steel Structures Interview
Design Steel Structures Interview Experienced
Design Steel Structures Interview Freshers