Building Construction - Part 1 Online Exam Quiz
Building Construction - Part 1 GK Quiz. Question and Answers related to Building Construction - Part 1. MCQ (Multiple Choice Questions with answers about Building Construction - Part 1
Queen closer may be placed
A : in header course
B : in stretcher course
C : in header course next to first brick
D : in stretcher course next to first brick
Dado is usually provided in
A : dinning halls
B : bath rooms
C : living rooms
D : verandah
The foundation in which a cantilever beam is provided to join two footings, is known as
A : strip footing
B : strap footing
C : combined footing
D : raft footing
The foundations are placed below ground level, to increase
A : strength
B : workability
C : stability of structure
D : all the above.
Stud(s) of a common wooden partition
A : are vertical wooden members
B : is the upper horizontal wooden member
C : is the lower horizontal wooden member
D : are the intermediate horizontal wooden members.
Pick up the correct statement from the following :
A : inclined borings are made for taking samples under existing structures
B : inclined borings are occasionally used instead of vertical holes.
C : the spacing of inclined borings is kept such that one bore hole is vertically above the bottom of an adjacent bore hole.
D : all the above.
To ensure that supporting area of an offset footing of a boundary wall is fully compressive, the C.G. of load must act
A : at the centre of the base
B : within the middle third of the base
C : within the middle fifth of the base
D : neither (a), (b) nor (c).
The 9 cm x 9 cm side of a brick as seen in the wall face, is generally known as
A : stretcher
B : face
C : front
D : header
The taper of precast concrete pile should not be more than
A : 1 cm per metre length
B : 2 cm per metre length
C : 4 cm per metre length
D : 5 cm per metre length.
The under surface of an arch, is called
A : soffit
B : intrados
C : haunch
D : back.
Advanced Surveying - Part 1 more Online Exam Quiz
Refractory Technology - Part 1
Stoichiometry - Part 1
Advanced Surveying - Part 1
Airport Engineering - Part 1
Applied Mechanics - Part 1
Building Materials - Part 1
Concrete Technology - Part 1
Construction Management - Part 1
Docks and Harbours - Part 1
Elements of Remote Sensing - Part 1